Industrial floor scrubber machines Melbourne
Scrubber machines that wash, scrub and dry hard floors in a single pass — removing oil, grime and spills that a mop only spreads around, and leaving floors dry and safe to walk on.
Supplying Melbourne businesses — including warehousing in Truganina and Derrimut, manufacturing in Dandenong South and Campbellfield, and freight around Tullamarine and the Port of Melbourne.
Clean and dry in one pass
Brushes scrub while a squeegee and vacuum recover the dirty water, so floors are ready for traffic straight away.
Safer floors
Removing oil and residue rather than smearing it reduces slip hazards in production and loading areas.
Hand-held to ride-on
From compact machines for tight spaces to ride-ons for large distribution centres.
How a floor scrubber works
A scrubber lays down water and detergent, agitates it with disc or cylindrical brushes, then a rear squeegee and vacuum pick up the dirty solution into a recovery tank. Because the water is recovered, the floor is left clean and almost dry.
Choosing a scrubber
Floor area, how dirty the floor gets, and how much space you have to manoeuvre decide whether a walk-behind or ride-on suits you. Battery type and tank size decide how long it runs between charges and refills.
Industrial floor scrubber machines in Melbourne
Scrubbers for Melbourne sites are prepared at our Cornubia workshop in Queensland, checked and test-run, then sent by road freight — usually arriving 3–5 business days after dispatch. Operator training is included, and advice, parts and servicing come from the same team that prepared the machine.
MELBOURNE · DELIVERY, SERVICE AND SUPPORT
- Dispatched from
- Our workshop in Cornubia, Logan (QLD) — about 1,750 km from Melbourne by road.
- Delivery time
- Typically 3–5 business days by road freight once the machine leaves the workshop. Your delivery date is confirmed with your quote.
- Before it travels
- Every machine is workshop-checked, charged and test-run before dispatch. Used machines get the same workshop check.
- Operator training
- Included. Your team is shown how to run, empty, charge and clean the machine safely.
- How servicing works
- Fault-finding starts by phone with our technicians. Parts are sent from Queensland by express freight, and any on-site work is scheduled and quoted before it goes ahead. We also service other brands.
- Time difference
- Queensland doesn't use daylight saving, so from October to April our phones run one hour behind Melbourne time.
- Typical sites we supply
- Warehousing in Truganina, Derrimut and Laverton North; manufacturing in Dandenong South and Campbellfield; freight around Tullamarine and the Port of Melbourne.
Questions
It depends on the model and battery. Lithium batteries generally offer longer, more consistent run times and faster charging than lead-acid — see our battery guide.
Scrubbers handle light debris, but heavy loose material should be swept first. Combination sweeper-scrubbers do both in one pass.
Yes. Machines are prepared at our Cornubia workshop and delivered to sites across Greater Melbourne, from the western logistics suburbs to Dandenong South.
Usually 3–5 business days by road freight from our Cornubia workshop, about 1,750 km away. We confirm the delivery date with your quote.
Most faults are diagnosed by phone with our technicians first. Parts are sent from Queensland by express freight, and on-site work is scheduled and quoted before it goes ahead. We service other brands as well as the machines we sell.